Sudershan Measuring And Engineering Pvt. Ltd.

We are a leading manufactuere of Coating Thickness Meter. We offer a wide range of Coating Thickness Meter.

Features:

• Very compact size with integrated probe.
• Magnetic induction method (ISO 2178, ASTM D7091), Measurement of non-magnetic coatings on magnetic substrates
• Quick one-hand operation. Place instrument on speci­men and see the measured value.
• Ready to measure immediately without calibration.
• Easy to perform zero-point correction provides correct measurement results for measuring applications with little changes in shape and substrate material.
• The one-point calibration function allows for an adaptation in cases of severe changes in shape or substrate materi­al and enables high-precision measurements in selected measurement ranges.
• Data transmitting to PC via USB cable.
• Statistic function allows for evaluation of a measurement series and display of the most significant characteristic statistical values.
• 9Auto power off.

Specifications:

High Precision Coating Thickness Gauge / DFT Meter - CTG 333 ECO ( Combined Model )

Specifications:

Technical Details :-

1. Fe-Magnetic substrate indicator: Steel/Iron

2. NF--Non- Magnetic substrate indicator: Copper/Aluminum

3. Auto Power off flag, auto power-off in minutes with no-operation

4. Low Battery indicator

5. Measured Reading Display

6. SNG: Single Measurement Mode

7. CON: Continuous Measurement Mode

8. Unit: um, mil

9. ON/OFF

10. Um/mil: Unit Switch Key, System Resetting Key (Press and Hold More than 3s)

11. Zero: Clearing Display when SNG shows; Using for calibration when CON shows,

12. MODE: Switch SNG/CON; SNG shows, Single-point Mode; CON shows, Continuous

Paint Impact Tester is used for testing of coatings on metal substrates. In accordance with ISO standard, the test panel is fixed on the die using a clamping device, so that the panel surface outside the test area is not affected by the rapid deformation caused by the falling weight.Anodized guide tube with a scale inches and mm Tolerance for ISO falling weights ± 1 g Maximum failing weight 2 kg. Exchangeable falling weights and dies. Can be easily converted for testing in accordance with ASTM.

PAINT COAT METER ( PCM)

CTG804F/NF

Technical Detaills:-

1.     Fe-Magnetic substrate indicator: Steel/Iron

2.     NF--Non- Magnetic substrate indicator: Copper/Aluminum

3.     Auto Power off flag, auto power-off in  minutes with no-operation

4.     Low Battery indicator

5.     Measured Reading Display

6.     SNG:  Single Measurement Mode

7.     CON: Continuous Measurement Mode

8.     Unit:  um, mil

9.     ON/OFF

10.  Um/mil: Unit Switch Key, System Resetting Key (Press and Hold More than 3s)

11.  Zero: Clearing Display when SNG shows; Using for calibration when CON shows,

12.  MODE: Switch SNG/CON; SNG shows, Single-point Mode; CON shows, Continuous

13.  Anti-Skid Slot

14.  Probe

15.  V-Groove

16.  Battery Compartment

1. Foreword

Dear user, thank you for purchasing this coating thickness gauge. In order to gain a more comprehensive understanding of this instrument and a better experience, please read this User's manual carefully before using the product.

2. Product Introduction

This instrument is a portable handheld thickness gauge that can measure the thickness of electroplated coatings or coatings on metal surfaces. Specifically, it can measure the thickness of non magnetic coatings (such as chromium, paint, ceramics, etc.), on magnetic materials (such as steel and iron) as well as the coating thickness (such as copper and aluminum) on non magnetic materials (such as paint, etc.). The instrument is equipped with a precision probe that automatically detects substrate properties and detects coating thickness through electromagnetic induction and eddy current effects.

3. Application Scenario

This instrument can measure the thickness of coatings without damage quickly and accurately. Widely used in the manufacturing industry, metal processing industry, chemical industry, commodity inspection and other testing fields, it is a necessary instrument for material surface treatment engineering. Can work stably in laboratories, workshop sites, and outdoors.

4. Measuring principle

This instrument utilizes two principles: electromagnetic induction and eddy current effect. Non magnetic coating thickness (such as paint, plastic, copper, chromium, zinc, etc.) on magnetic metal substrates (such as steel, iron, and their alloys) can be measured non-destructive; The thickness of non conductive coatings (such as oxide film, plastic, paint, etc.) on non magnetic metal substrates (such as copper, aluminum, zinc, tin, etc.).

Fe Probe: Using the principle of electromagnetic induction, When the probe is contact with a coated magnetic substrate, the probe and the magnetic substrate form a closed magnetic circuit. The coating thickness corresponds to the magnetic resistance of the magnetic circuit, and the coating thickness is measured by detecting changes in magnetic resistance.

NFe Probe: Using the principle of eddy current effect, when the probe is contact with a coated non magnetic substrate, the probe generates eddy currents on the substrate. The feedback effect of eddy currents on the probe is proportional to the coating thickness. By detecting this feedback quantity, the purpose of measuring the coating thickness is achieved.

Fe+ZnProbe: Automatically identify whether there is a Zn layer above magnetic materials

PAINT COAT METER ( PCM)

CTG804F/NF
DFT Meters CTG 804 F NF

Technical Detaills:-

1.     Fe-Magnetic substrate indicator: Steel/Iron

2.     NF--Non- Magnetic substrate indicator: Copper/Aluminum

3.     Auto Power off flag, auto power-off in  minutes with no-operation

4.     Low Battery indicator

5.     Measured Reading Display

6.     SNG:  Single Measurement Mode

7.     CON: Continuous Measurement Mode

8.     Unit:  um, mil

9.     ON/OFF

10.  Um/mil: Unit Switch Key, System Resetting Key (Press and Hold More than 3s)

11.  Zero: Clearing Display when SNG shows; Using for calibration when CON shows,

12.  MODE: Switch SNG/CON; SNG shows, Single-point Mode; CON shows, Continuous

13.  Anti-Skid Slot

14.  Probe

15.  V-Groove

16.  Battery Compartment

• Portable
• Reading can be locked
• Calibration facility with Standard calibration foils
• Can be used in any position
• The reading is available on dial with meter scale on mirror
• Supplied with attractive wooden case

Is a non –Destructive Thickness Tester specially designed for zinc on Steel & fasteners.

Specification

Measuring Surface

Features:

The thickness gauge is used to measure the thickness of the plated and coated sheet on metal, e.g. paint/enamel/ chrome on steel, paint and anodizing coating on aluminum/copper. The gauge takes the precision integrated probe, and uses principles of electro-magnetic induction and the eddy current effect, which automatically detects the attribute of substrates.

The Gauge is designed for non-destructively measuring the thickness of coating and painting. It is essential for material surface treatment and widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and also able to work steadily in the laboratory, workshop and outdoor.

·         FSTN LCD Display

·         Built-in Black Light

·         Integral Probe F&NF, Auto detecting attribute of substrates

·         Nice shell design for easy reading

·         Built-in Silicone Slip Strip

·         Zero Calibration and 50/100/250/500/1000um Calibration Point


Specification

•Measuring:Continuous and Single Measurementavailable

•Memory:600data  storage

•Unit:Metric/Imperial switchable(mil/um selectable)

•Backlight:Brightness adjustable, clear and easyreadingunderany lightcondition

•Alarm:Sethigherand loweralarmrangefor measuring

•Calibration: Zero-in, 2 pointscalibrationandmulti-pointcalibration  selectable

•Battery:Lowbattery  indication

•Datatransfer:USB, Bluetooth.

•APP:Windows,Android App, iOSApp

•Language:Englishand Chinese selectable(customizationfor  other language available)

•Data Delete:delete single data or clear all the data

Specifications: 

• Automotive Companies / Workshops
• Paint shops
• Coating Plants Units
• Powder Coating Plants Units
• Anodizing Plants Units
• Electroplating Plants Units

Technical Parameters

• Three points are touched on the tested surface(roller,pencil lead)
• The angle between pencil and the tested surface is 45o
• Pressure of pencil lead is 1±0.05kg
• Hardness Series:6B.5B.4B.3B.2B.B.HB.F.H.2H.3H.4H.5H.6H.7H.8H.9H